Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Construction in Ontario, CA | Workshop Contractors
We provide independent ES Windows service across Ontario, CA, handling everything from full window replacement to frame re-flashing and impact window installation. What makes our ES Windows work different here is that we diagnose failures by wall assembly, not just by unit, because Ontario’s post-war slab-on-grade homes shift in ways that newer north-side tracts don’t. Call (844) 384-3361 for a free estimate.
Our team has spent years installing and servicing ES Windows units throughout the Inland Empire. We know how these frames, sashes, and hardware behave under Ontario’s specific heat, wind, and stucco conditions. We’re an independent ES Windows service provider with no authorization, partnership, or warranty endorsement from ES Windows, but we carry the parts and the field knowledge to keep these units functioning. Learn more about our ES Windows sales & service expertise.
Why Ontario Residents Choose Us for ES Windows Service
Ontario homeowners don’t call us because we sell a particular window. They call because we understand what happens when a 1960s aluminum-frame slider gets racked by shifting clay soil, or when a 1990s vinyl single-hung takes a decade of 100°F afternoon sun on the west elevation. We’ve worked on enough ES Windows in San Antonio Heights and across Ontario to know which failures repeat and which ones signal a structural problem behind the frame.
Noel Figueroa, our General Contractor in Ontario, grew up in the Vineyard neighborhood of Ontario. He learned fundamentals at Chaffey College, where construction technology put him on job sites before he was old enough to rent a truck. That local history matters when we’re measuring rough openings on a street where every third house has the same original ES aluminum slider. We know what those openings looked like new, and we know what decades of Ontario clay movement does to them.
We stock ES-compatible OEM hardware, rollers, and weatherstripping locally, and when OEM parts are discontinued we source quality aftermarket equivalents matched to the unit’s actual frame depth and glass package. Our service area covers the full Ontario service area, from the older core south of Holt Boulevard up to the newer planned communities north and east of the city.
Styles & brands we work with
Common ES Windows Construction Problems We Solve in Ontario
- Seized slider tracks after Santa Ana winds. Ontario’s fall wind events pack slider tracks with grit and wind-driven dust. ES aluminum-frame sliders from the 1960s and 1970s are especially vulnerable because their original track profiles have narrow clearances. Rollers seize, sashes bind, and homeowners end up forcing the panel until the handle pulls loose. We clean, rebuild, and replace rollers with units matched to the original track geometry.
- Weatherstripping breakdown on west- and south-facing elevations. Ontario regularly sees summer days over 100°F, and that heat concentrates on west and south exposures. ES vinyl single-hung and slider units from the 1990s and 2000s lose weatherstripping elasticity under those conditions. Seals shrink, glass fogs, and wind whistles through the gaps. We re-seal with materials rated for inland valley temperature swings.
- Stucco cracking at the rough opening. Ontario’s semi-arid stucco shell cycles hot and cold every season, and hairline cracks at ES window heads and jambs let water track in behind the frame. By the time the homeowner sees peeling paint or a soft sill, the flashing and rough opening often need correction, not just caulk. We cut back, re-flash, and re-seal before the window gets reset.
- Out-of-square openings on slab-on-grade homes. In the older neighborhoods near downtown and south Ontario, post-war homes sit on shallow footings over expansive clay. When those slabs move, the rough openings go out of level and square. ES frames get racked, glazing stresses, locks stop lining up. This is a structural correction job, not a window swap, and we treat it that way.
- Retrofit insert failures from earlier remodel cycles. South Ontario has seen multiple remodel waves, and some ES retrofit/insert units installed in the 1980s and 1990s were set into openings that were never properly flashed. We pull those units, assess the existing frame depth and wall condition, and decide honestly whether a repair or a full replacement with proper flashing is the right call.
ES Windows Service in Ontario: What Local Conditions Mean for Your Equipment
Here’s a specific Ontario fact that shapes our ES Windows work more than anything else: South Ontario’s older post-war tracts were built slab-on-grade on expansive clay with shallow footings. That means the ES Window rough openings in those homes go out of level and square as the slab moves over time. A replacement job north of the 10 in a 2000s stucco tract might be as simple as pulling a tired window and setting a new one. South of Holt Boulevard, it usually starts with measuring how far the opening has racked, then re-flashing and re-squaring before a new unit ever goes in.
That slab-movement reality is concentrated in the older core around downtown and the neighborhoods south of Holt Boulevard. It does not show up the same way in the 1990s and 2000s stucco homes on the north and east sides, where slab design and soil preparation were different. So when an Ontario homeowner tells us their ES Windows have been binding and leaking for years, our first question is where the house sits, because that tells us whether we’re looking at a window problem or a foundation-and-framing problem disguised as a window problem.
On a block of post-war tract homes south of Holt Boulevard near ES Windows repair in Chino and downtown Ontario, our crew pulled a set of original ES aluminum sliders that had been binding and leaking for years after the slab shifted. We found the rough openings out of square and stucco cracked at the heads, so we re-squared and re-flashed each opening before setting new ES vinyl single-hung units with fresh sill pans and tempered glazing on the street-facing side. The homeowner’s main complaint, sashes that stuck every summer and wind that whistled through the seals, was solved by correcting the wall, not just the window.
ES Windows Models & Products We Service in Ontario
We service the full range of ES Windows units found in Ontario homes. That includes vinyl single-hung and slider lines common in 1990s and 2000s Inland Empire tract builds, aluminum-frame sliders typical of 1960s and 1970s post-war homes, vinyl fixed and picture units used in north- and east-side planned communities, and retrofit or insert units installed during earlier Home Remodeling – Ontario cycles in south Ontario.
Our parts approach is simple: use ES-compatible OEM hardware, rollers, and weatherstripping where it’s still available, and quality aftermarket equivalents where OEM parts are discontinued. We always match parts to the unit’s actual frame depth and glass package, not to a generic catalog number. When the frame is sound and only the sash, seal, or hardware has failed, we repair and re-seal. When the surrounding stucco or wall opening is the real problem, we tell the owner that a swap without flashing and framing correction just pushes the failure down the road.
See the difference
Before
After
Before
After
Before
AfterES Windows Service Pricing in Ontario
What does ES Windows service cost in Ontario? The honest answer is that it depends on whether we’re repairing a unit or replacing it, and whether the rough opening needs correction. Here are the price ranges we see across Ontario:
| Service | Price Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair (flashing and edge work near window headers) | $400 – $1,800 |
What drives the cost is the condition of the rough opening. A clean swap in a 2000s north-side tract home sits at the lower end. A south Ontario post-war home with a racked opening, cracked stucco, and degraded flashing sits at the higher end, because the frame correction and flashing work adds labor hours and materials. Every free estimate includes a written line-item quote so you know exactly what’s being done and why. Call (844) 384-3361 to schedule yours.
Serving Ontario, CA — Our Local Coverage Area
We’re based in the Ontario area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – ES Windows Construction in Ontario
Summer heat over 100°F causes the aluminum and vinyl frame components to expand at different rates, and combined with the fine dust that builds up in slider tracks, the rollers bind and the seals lose their flex. In Ontario’s Santa Ana wind season, that dust load increases quickly. We solve it by cleaning and rebuilding the tracks, replacing worn rollers with correctly matched units, and re-sealing the sash. Call (844) 384-3361 for an exact diagnosis and quote, estimates are free.
Yes, and that’s the right time to do it. Cracked stucco at the frame means water has been getting behind the ES unit and the flashing is likely degraded. We pull the window, cut back the damaged stucco, re-square and re-flash the opening, then set the new unit correctly. Replacing the window without correcting the opening would just recreate the same failure. Call (844) 384-3361 and we’ll assess the opening before quoting.
They can. Buildings near the I-10 corridor and Ontario International Airport face higher wind loads and more airborne particulate, so frame anchoring, sealing, and glazing choices may need to meet stricter performance specs than a typical residential swap. We review the building’s location and exposure before specifying units. Call (844) 384-3361 for a free estimate.
Yes, because window headers sit directly under roof edges and eaves in many Ontario homes, especially in older post-war tracts where the roofline is low. If we find that roof flashing or edge metal is contributing to water intrusion at the window head, we include that roof repair in the scope of the project. The window and the roof edge are part of the same drainage assembly. Call (844) 384-3361 to schedule an assessment.
No. We are an independent ES Windows service provider. We have no authorization, partnership, or warranty endorsement from ES Windows. What we have is years of hands-on experience installing and repairing their units across Ontario and the Inland Empire, plus access to ES-compatible OEM hardware and quality aftermarket parts when OEM stock is discontinued. We answer to you, not to a manufacturer’s warranty administrator.
Service Areas Near Ontario
Our ES Windows work takes us across the western Inland Empire. We regularly serve Woodcrest, Anaheim, North Tustin, Orange, Loma Linda, and Buena Park, bringing the same wall-assembly-first approach to every job. If you’re in a nearby city and need independent ES Windows service, we’re your local crew. For specifics, see our ES Windows service in Upland and ES Windows service in Montclair pages.
Book Your ES Windows Service in Ontario Today
If your ES Windows are sticking, leaking, or whistling, don’t wait through another Ontario summer. Call (844) 384-3361 today to schedule your free estimate. We’ll measure, diagnose, and quote the right fix, whether that’s a repair or a full replacement with proper flashing and framing correction. Build it right the first time. The second time costs twice as much and nobody’s happy about it.
Written by Noel Figueroa, Owner & General Contractor at Workshop Contractors, serving Ontario and the Inland Empire since his first framing hammer found its way into his hands.