Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Ontario, CA | Workshop Contractors
We install, repair, and replace Jerith aluminum and vinyl fence systems across Ontario as an independent contractor with over a decade of product-specific experience. The thing that sets our Jerith work here apart is that we build for Ontario’s actual ground conditions: expansive clay in the older tracts south of Holt Blvd, intense summer UV, and Santa Ana wind loads that punish shallow footings. We’re not authorized by Jerith, and that’s fine by us. It means we troubleshoot real failure points instead of reading from a manufacturer script. Call (844) 384-3361 for a free estimate.
Why Ontario Residents Choose Us for Jerith Service
Jerith’s vinyl and aluminum lines are well built, but they aren’t all installed the same way. In Ontario, the difference between a fence that lasts twenty years and one that leans after the first wet winter usually comes down to what’s under the post. We’ve spent years digging into the clay and sandy loam across this valley, and we know how to set footings that hold. Noel Figueroa, our General Contractor in Ontario, grew up in the Vineyard neighborhood and learned the fundamentals at Chaffey College, where the construction technology program put him on real job sites before he could legally rent a truck. He’s been working the Inland Empire ever since, and he still believes a well-built structure is the most honest thing a person can leave behind. That belief shows up in how we source parts, how we set posts, and how we treat your fence line like it’s our own.
Styles & brands we work with







Common Jerith Construction Problems We Solve in Ontario
- Vinyl posts leaning or racking after soil movement. The older neighborhoods near downtown and south Ontario sit on expansive clay that swells when wet and shrinks when dry. Standard post depths that work in Upland or Claremont often fail here. We reset posts with deeper footings and gravel drainage so the fence line stays straight through wet winters and dry summers.
- Aluminum panels dented or hinges binding from Santa Ana winds. Fall wind events can hurl branches, patio furniture, and loose debris into fence panels. We’ve seen hinges bind after a single bad windstorm because the gate post shifted just enough to throw off the latch alignment. We re-hang gates, reinforce posts, and replace dented sections with matching Jerith panels.
- UV chalking and color fade on darker vinyl styles. Ontario regularly hits 100°F in summer, and after a decade of that sun exposure, darker Jerith vinyl colors start to chalk and dull. We’ll give you an honest call on whether a deep clean and UV protectant treatment buys you more years, or whether panel replacement makes better sense.
- Rusted or loosened fasteners and brackets at gate posts. The dry-to-wet seasonal swings in the inland valley cause thermal cycling that works screws and brackets loose over time. We replace corroded hardware with OEM Jerith hardware whenever available, and we check every gate hinge and latch during a service call, not just the section you flagged.
- Shallow footings from original installations. We frequently see Jerith fences that were installed years ago by crews who didn’t account for Ontario’s clay. The posts look fine at ground level but have been moving below grade the whole time. Our fix starts below the surface, which is the only way the repair holds.
Jerith Service in Ontario: What Local Conditions Mean for Your Equipment
Here’s the thing most fence installers in this market won’t tell you: Ontario’s older slab-on-grade homes south of Holt Blvd sit on expansive clay that shifts with seasonal moisture. That’s not a footnote. It’s the reason we pull leaning Jerith posts out of the ground in neighborhoods near downtown with alarming regularity. The clay swells when winter rains soak it, then contracts through the dry summer, and every cycle works the post a little looser. Jerith fences installed with standard-depth footings simply don’t survive that movement the way they would in neighboring foothill cities, where the soil drains differently and the base is more stable. When we install Jerith in south Ontario, we dig deeper, add gravel drainage at the base, and use a concrete collar that gives the post a fighting chance against the clay. Build it right the first time. The second time costs twice as much and nobody’s happy about it.
Jerith Models & Products We Service in Ontario
We work on the full Jerith residential lineup: 3-rail and 4-rail aluminum fence styles, vinyl privacy and picket lines, aluminum deck and porch railing series, and the vinyl balcony and stair rail kits. When a repair requires parts, our default is OEM Jerith components including posts, caps, rails, and hardware, because matching fit and finish matters on a fence that’s already been in the ground for years. For discontinued styles where Jerith no longer stocks the part, we source aftermarket equivalents that meet or exceed the original spec. We also handle full Jerith sales & service consultations when you’re deciding between a repair or a complete replacement, and we’ll walk you through what each option actually costs in Ontario’s market.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Ontario
What you’ll pay depends on the scope of the job, the condition of your existing fence line, and whether we’re repairing a section or replacing the entire run. Vinyl fence installation in Ontario typically runs $3,500 to $9,000, aluminum fence installation lands between $4,000 and $10,000, and Home Remodeling – Ontario projects like driveway replacement run $5,000 to $14,000. The free estimate we provide includes a walk of your fence line, a look at your soil and drainage, and a written line-item quote so you can see exactly what’s included before you commit. Call (844) 384-3361 to schedule yours.
Serving Ontario, CA — Our Local Coverage Area
We’re based in the Ontario area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Ontario
Yes, but only if the posts are set to handle the wind load. Jerith vinyl panels themselves are engineered for solid wind resistance, but the weak point in Ontario is always the footing. We set posts deeper than the minimum and use concrete collars designed for the wind speeds we see in the fall. If your existing fence is shifting in the wind, call (844) 384-3361 and we’ll inspect the post bases before recommending repairs.
Almost always, it’s expansive clay moving below grade. South Ontario’s post-war tract homes were built on slab-on-grade over clay soil that swells and shrinks with moisture. Posts set at shallow depths get worked loose over time. The fix is pulling the post, digging a deeper footing with gravel drainage, and resetting it in concrete. We do this repair regularly across downtown and the neighborhoods south of Holt Blvd, and we quote it as a targeted fix rather than a full fence replacement when the rest of the line is sound.
Yes. We source OEM Jerith posts, caps, rails, and hardware whenever the part is still manufactured. If Jerith has discontinued the style, we’ll source an aftermarket equivalent that meets or exceeds the original specification and matches the existing fence as closely as possible. We’ll always tell you which route we’re taking and why before we order anything.
A new Jerith aluminum fence installation in Ontario typically runs $4,000 to $10,000, depending on the linear footage, the number of gates, and the prep work required on your soil. We’ll price your specific job after walking the yard and checking what’s under the surface. Estimates are free and written so you can compare line items. Call (844) 384-3361 to schedule a walk-through.
It depends on the fence’s age and how widespread the fading is. If the vinyl is chalking on one or two panels but the structure is sound, a targeted panel replacement with OEM Jerith parts is usually the right call and costs far less. If the entire run is chalked, brittle, or shifting at the posts, replacement starts to make more sense. We recently replaced a racked Jerith vinyl privacy fence in a south Ontario neighborhood near downtown, where the original posts had been set too shallow in expansive clay and were leaning after a wet winter. Our crew pulled the old posts, dug deeper footings with gravel drainage, reset them in concrete with new OEM Jerith post caps, replaced the two damaged panels, and re-hung the gate. The homeowner got a straight, wind-ready fence line without tearing out the entire run. Call (844) 384-3361 and we’ll give you the same honest read on your fence.
Service Areas Near Ontario
We run Jerith service across the greater Ontario area, including Upland, Montclair, Chino, Rancho Cucamonga, and Claremont. If you’re in one of those cities and your Jerith fence needs attention, we’re already working in the area. Read more about our Jerith service in Upland and Jerith service in Montclair, or see our full Ontario service area for coverage details.
Book Your Jerith Service in Ontario Today
If your Jerith fence is leaning, faded, or failing at the gate, call us before a small problem becomes a full replacement. We’ll come out, assess what’s happening under and above ground, and give you a straight answer on repair versus replace. Call (844) 384-3361 to schedule your free estimate.
Written by Noel Figueroa, Owner at Workshop Contractors, serving Ontario since the start of his career.