Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Pacifica, CA | Workshop Contractors
We install and service Mr-Glass shower enclosures, glass panels, and window and door units across Pacifica as an independent contractor, not a manufacturer-authorized dealer. That independence matters here because Pacifica’s bluff-top lots, salt air, and wet winters mean glass work has to be planned around slope drainage and coastal review before a panel ever gets ordered. If you need a Mr-Glass enclosure repaired, re-templated, or replaced in Pacifica, call Noel Figueroa and our team at Workshop Contractors at (844) 384-3361 for a free estimate.
Why Pacifica Residents Choose Us for Mr-Glass Service
We know Mr-Glass hardware well enough to tell you in the first ten minutes whether a dragging slider needs new rollers or a re-templated panel. Noel Figueroa, our owner and general contractor, learned framing and finish work from the same generation of Inland Empire tradesmen who built half the houses on his street, and he has spent decades since correcting the kinds of out-of-square, moisture-swollen openings we see constantly on Pacifica hillside homes. That background means we do not just swap parts. We look at the curb, the drainage, the wall behind the glass, and the hardware together, because on a bluff-side lot those systems fail as a group.
Pacifica homeowners call us because we match the original Mr-Glass profile and hole spacing when the panel is sound, and we say so plainly when it is not. We carry OEM-compatible rollers, hinges, sweeps, and seals for fast turnarounds, and on coastal jobs we lean toward marine-grade stainless hardware because standard finishes do not survive Pacifica’s salt air for long. For broader Mr-Glass sales & service questions, our team can walk you through what is worth repairing versus replacing.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Pacifica
Here is what actually goes wrong with Mr-Glass units on this coastline, and why:
- Header-track and pivot hardware seizing from salt air. Pacifica’s onshore wind carries salt that settles on aluminum and chrome finishes. Sliders bind, hinges stiffen, and within a few seasons the door fights you. We replace with marine-grade stainless hardware and re-lubricate tracks with a coastal-appropriate grease that will not gum up in the fog.
- Silicone seals failing under constant fog and winter moisture. The marine layer keeps surfaces damp even in summer, and winter rain pushes water against glass-to-curb joints. When seals degrade, water tracks behind the panel and feeds mold at the curb. We strip old silicone, dry the joint properly, and re-seal with a product rated for continuous coastal exposure.
- Tempered panels out of plumb on settled hillside openings. Pacifica homes built in the 1950s through 1970s have moved. A Mr-Glass panel ordered to original rough opening dimensions no longer sits square, and the stress concentrates at the hinge edge. We re-template to the corrected opening before re-hanging, which is the only way to stop the panel from developing edge chips or stress fractures.
- Water wicking up behind enclosures on poor-drainage walls. Storm runoff off Pacifica slopes saturates the ground, and that moisture moves up through framing behind the shower. We have pulled glass off walls where the curb looked fine but the studs behind it were soft. The fix starts with drainage and waterproofing, not with the glass.
- Chipped edges and pitted glass from repeated binding. A panel that has been forced past seized hardware for even a season can develop edge chips that compromise temper. We inspect every edge and corner before re-hanging, and we will tell you honestly if the panel has become a stress fracture waiting to happen.
Mr-Glass Service in Pacifica: What Local Conditions Mean for Your Equipment
Pacifica sits on a narrow shelf between the Pacific and the Santa Cruz Mountains, and nearly every home here is built on a bluff, a hillside, or a lot that drains toward the ocean. For Mr-Glass owners, that creates a double pressure on any glass opening. The salt-laden onshore air attacks hardware and metal finishes from the front, while storm runoff and saturated soils push moisture into the wall from behind. One of our crews was called to a split-level in the Rockaway area where a Mr-Glass frameless slider had started dragging and the curb stayed wet long after showers. The original silicone seal had failed under years of fog and salt, and runoff off the slope had swelled the wood curb enough to rack the opening out of plumb. We reset the curb and waterproofing, re-templated the panel to the corrected opening, and re-hung the glass on marine-grade stainless hardware. The slider tracked clean through a wet Pacifica winter. That job is the rule here, not the exception: in Pacifica, the glass cannot be fixed independently of the slope and the salt.
Mr-Glass Models & Products We Service in Pacifica
We service the main Mr-Glass product families: frameless sliding shower door kits with tempered 3/8-inch panels and chrome or brushed-nickel header tracks, pivot and neo-angle frameless enclosures for corner and alcove showers, mirror closet doors and sliding bypass door sets, and custom-cut tempered glass panels and shelves for bath and interior use. When the glass itself is sound, we match the original profile and hole spacing with OEM or quality aftermarket hardware. When it is not, we say so. We stock common Mr-Glass rollers, hinges, sweeps, and seals for fast Pacifica turnarounds, and we order custom panels through local glass suppliers who understand coastal tempering requirements.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Pacifica
| Service | Typical Range in Pacifica |
|---|---|
| Shower Replacement | $3,000 – $8,500 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Window Replacement | $4,500 – $15,000 |
The biggest cost driver on a coastal hillside job is whether the opening needs to be corrected before glass goes back in. A re-seal might be a few hundred dollars. A full re-template on a racked opening with new waterproofing and marine hardware runs higher because the wall itself is part of the scope. Every estimate is free, and it includes a written line-item breakdown so you see exactly where the money goes. Call (844) 384-3361 and we will put real numbers on your specific opening.
Serving Pacifica, CA — Our Local Coverage Area
We’re based in the Pacifica area as a General Contractor in Pacifica and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Pacifica
Often not without modification. Homes built on Pacifica’s slopes and bluffs have settled over decades, and a panel ordered to the original rough opening measurement frequently sits out of plumb. We re-template the panel to the corrected opening rather than forcing glass into a racked frame. That is the only way to prevent stress fractures at the hinge edge. Call (844) 384-3361 and we will measure your opening before you order anything.
Because Pacifica’s salt-laden air settles on the chrome and aluminum hardware and attacks it constantly. Standard finishes fail in a few seasons, which is why we use marine-grade stainless steel on coastal jobs here. The binding is usually seized rollers or a corroded hinge, and the fix starts with hardware replacement and a track re-lubrication rated for salt exposure. Call us for Mr-Glass service in San Bruno and nearby areas for a hardware inspection before the glass gets forced past the bind and chips.
Yes, on ocean-side walls and bluff-adjacent lots. Pacifica sits within shoreline jurisdiction, and work that touches the exterior envelope can trigger coastal development review and slope-drainage requirements. We sequence the Mr-Glass repair in South San Francisco and local glass and window work around those reviews so you are not paying for panels that sit in storage while permits clear. Our team handles the permitting on remodels where glass replacement is part of a larger scope.
If the glass is sound and the curb has not rotted, yes. We strip the old silicone, dry the joint completely, and re-seal with a product made for continuous coastal moisture. If the wall behind the enclosure has soaked through, a re-seal alone will fail within a year. We inspect the curb and framing before we quote, so you pay for what actually fixes the leak. Call (844) 384-3361 for an assessment.
Saturated soils from storm runoff wick moisture up through the wall framing, and failed seals let shower water track behind the panel at the same time. Pacifica’s heavy winter rain and persistent fog mean the wall never fully dries between wet seasons. The effective repair addresses both paths of moisture: drainage and waterproofing at the curb, then a proper seal on the glass. Call us for Mr-Glass repair in Broadmoor and surrounding areas and we will tell you what is actually leaking before you spend money on a panel that was never the problem.
Service Areas Near Pacifica
We serve Pacifica and the surrounding Peninsula and coastal communities. That includes the full Pacifica service area across 94044, plus nearby hillside and coastal neighborhoods with similar slope and moisture conditions. We also run Mr-Glass service in Mr-Glass service in Visitacion Valley and Mr-Glass service in Colma, where the fog and salt air create the same hardware failures we fix in Pacifica every week.
Book Your Mr-Glass Service in Pacifica Today
If your Mr-Glass enclosure is binding, leaking, or sitting out of plumb on a Pacifica hillside, call Noel Figueroa and our crew. We will inspect the glass, the hardware, and the wall behind it, then give you a written quote before any work starts. Estimates are free. Reach us at (844) 384-3361 to schedule your appointment. Build it right the first time. The second time costs twice as much and nobody’s happy about it.
Written by Noel Figueroa, Owner at Workshop Contractors, serving Pacifica and the surrounding coastal communities.