Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Pacifica, CA | Workshop Contractors
We’re an independent Unilock service provider, and we handle paver installation and repair across Pacifica. The work here is different from anywhere else on the Peninsula because of one thing: coastal bluff jurisdiction. Any Unilock driveway, patio, or retaining wall that changes drainage or grading inside Pacifica’s coastal zone can trigger a California Coastal Commission permit review before a single paver is laid. That’s the reality we’ve been navigating for years, and it’s why our Unilock sales & service work in this city starts with the site, not the product catalog. Call (844) 384-3361 to talk through your project.
Why Pacifica Residents Choose Us for Unilock Service
Most Pacifica homes sit on hillside lots built between the 1950s and 1970s. The original hardscaping, where it exists, was never designed for what coastal weather does to it now. Salt-laden fog eats edge restraints and fasteners. Winter storm runoff channels down slopes and undermines base material. We see it every season. Noel Figueroa owns Workshop Contractors, and he grew up around tradesmen who framed houses the old way: square, level, and built to hold. That’s the standard we bring to Unilock work in Pacifica, which is why we re-grade sub-bases, install drainage behind retaining walls, and upgrade to marine-grade polymeric sand on nearly every coastal project. We also handle Unilock repair in South San Francisco with the same coastal-grade approach. We’re not here to lay pavers fast. We’re here to keep them in place through Pacifica’s wet winters and salt air, which is a different job entirely.
Styles & brands we work with
Common Unilock Construction Problems We Solve in Pacifica
- Base erosion and settlement on sloped driveways. Concentrated winter runoff scours the aggregate base under Unilock pavers, which is why Pacifica driveways heave and separate at the joints within a few seasons. We re-grade with positive drainage and add a French drain where the slope demands it.
- Salt-air corrosion of polymeric sand and edge restraints. Pacifica’s onshore air carries enough salt to break down standard edge restraints and cause sand washout within two to three seasons. We replace with stainless steel restraints and marine-grade polymeric sand that holds up longer in this microclimate.
- Efflorescence and surface staining from persistent marine moisture. Fog drip and poor drainage behind Unilock retaining walls push minerals through the paver face. We correct the drainage first, then address the staining, because cleaning alone doesn’t stop the source.
- Frost heave and root intrusion on clay hillside soils. Pacifica’s clay soils hold water through the wet season, and when roots find their way under a patio or driveway, pavers lift unevenly. We excavate to a proper depth, install geotextile fabric, and rebuild the base so movement stays within tolerance.
- Loose pavers at the edges of patios and walkways. On Pacifica’s sloped lots, edge failure is usually the first sign of a deeper base problem. We anchor the perimeter properly and check what’s underneath before deciding whether repair or replacement makes more sense.
Any one of these problems looks small at first. Left alone, the base fails, the pavers shift, and you’re looking at a full driveway replacement instead of a targeted repair. Build it right the first time. The second time costs twice as much and nobody’s happy about it.
Unilock Service in Pacifica: What Local Conditions Mean for Your Equipment
Here’s the detail that separates Pacifica from San Mateo or Burlingame: the coastal bluffs here fall under the California Coastal Commission’s shoreline jurisdiction. Any Unilock hardscape inside the coastal zone that alters drainage or grading, even a driveway regrade or a retaining wall rebuild, may require a coastal development permit. Inland Peninsula cities don’t face that layer for typical patio or driveway work. Pacifica does. That means our crew spends real time on the front end checking parcel boundaries against coastal zone maps, confirming whether your project triggers review, and working with you on the paperwork. On a hillside lot in the Rockaway neighborhood, we repaired a failing Unilock Brussels Block driveway where winter runoff had scoured the base and salt air had degraded the polymeric sand. We bring that same expertise to Unilock repair in Broadmoor and surrounding hillside communities. We re-graded the sub-base with a French drain, replaced corroded edge restraints with stainless steel, and reinstalled the pavers with marine-grade polymeric sand, restoring a stable, free-draining surface that has held through two rainy seasons. That’s what coastal-permit-aware work looks like in Pacifica: the drainage and the permits handled before the pavers go down.
Unilock Models & Products We Service in Pacifica
We work with Unilock’s full hardscape line, including Brussels Block, Beacon Hill, and Elegance pavers, plus companion products from Techo-Bloc, Unilock’s sister brand, which is often specified for walls and steps alongside Unilock pavers. Our parts approach is practical: we use Unilock OEM-compatible edge restraints, polymeric sand, and base materials, but we go aftermarket where coastal conditions demand a better product. That usually means higher-salt-tolerance polymeric sand and stainless steel fasteners that won’t rust out in Pacifica’s fog. We keep these upgraded materials available for Pacifica jobs, because sourcing marine-grade components on short notice from out of the area slows the entire repair. For local Pacifica hardscape work, repair is typically viable for localized settling, while full replacement is the honest call when base failure or widespread joint separation tells us the drainage system underneath was never adequate.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Pacifica
Pricing for Unilock work in Pacifica depends on slope, drainage work, and whether the job sits inside the coastal permit zone. Here’s what our recent Pacifica projects have run:
| Service | Typical Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
The range is wide because a flat patio in a backyard is a different job from a sloped driveway that needs a French drain, a retaining wall check, and coastal permit coordination. A free estimate from us includes a site walk, a look at your existing base and drainage, and a written line-item quote so you can see exactly where the money goes. Call (844) 384-3361 and we’ll schedule the walk.
Serving Pacifica, CA — Our Local Coverage Area
We’re based in the Pacifica area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Pacifica
Maybe. If your hardscape project sits within Pacifica’s coastal zone and changes drainage or grading, a coastal development permit from the California Coastal Commission may be required. It depends on the exact parcel and scope. We check this on every Pacifica project before we quote, because permit surprises are the last thing a homeowner needs mid-renovation. Call (844) 384-3361 if you want us to check your property.
Sloped Pacifica driveways concentrate winter runoff, which erodes the base under the pavers and washes out the polymeric sand at the joints. If your pavers shift every year, the drainage under the pavers was likely never built for a hillside. A targeted base regrade with a French drain usually fixes it. Call (844) 384-3361 and we’ll tell you whether your driveway needs a repair or a full base rebuild.
The pavers themselves hold up, but the components around them, mainly edge restraints and standard polymeric sand, corrode or wash out faster in Pacifica’s coastal air. We routinely upgrade to stainless steel restraints and marine-grade polymeric sand to extend the life of the installation. It’s a small cost difference that changes how many seasons you get before the first repair.
Localized settling in one area of the patio or wall is usually repairable. Widespread joint separation, a wall leaning noticeably off vertical, or pavers sinking across the entire surface tells us the base or drainage has failed and the system under the pavers needs rebuilt. We’ll give you the honest read either way. Call (844) 384-3361 for a free inspection.
Pacifica’s clay soils hold water, so base prep here goes beyond what a flat inland job needs. We excavate deeper, install geotextile fabric between the subgrade and the aggregate, compact in lifts, and add drainage, usually a French drain or surface grading, so water doesn’t pool under the pavers. Skipping that step is why so many Pacifica hardscapes fail early. Call (844) 384-3361 and we’ll walk the site and explain what your specific lot needs.
Service Areas Near Pacifica
We serve Pacifica and the surrounding communities, including Pacifica service area coverage for hardscape and full remodeling work. If you’re nearby, we also provide Unilock service in Visitacion Valley and Unilock service in Colma, plus work in Woodcrest and parts of the upper Peninsula. Same crew, same coastal focus.
Book Your Unilock Service in Pacifica Today
If your Unilock driveway, patio, or retaining wall is shifting, losing sand, or just looks tired after another Pacifica winter, call us. We also provide Unilock service in San Bruno and nearby Peninsula communities. We’ll walk the site, check the drainage, flag any permit issues, and give you a written quote. One contractor, every trade. Reach Noel Figueroa and the Workshop Contractors team at (844) 384-3361.
Written by Noel Figueroa, Owner & General Contractor at Workshop Contractors, serving Pacifica and the Peninsula.