Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable General Contractor Across Lexington Hills
Hiring a General Contractor in Lexington Hills means finding someone who understands county permitting, Cal Fire WUI rules, and hillside engineering before the first estimate is written. Workshop Contractors has built and remodeled homes across the Santa Cruz Mountains for years, and we know what passes inspection here and what doesn’t. If you’re planning a kitchen remodel, an ADU, a roof replacement, or a full home addition in Lexington Hills, call Noel Figueroa and the team at (844) 384-3361. We give free estimates with real line-item pricing, not ballpark guesses.
Why Workshop Contractors Is Lexington Hills’s Preferred General Contractor Company
Lexington Hills homeowners call us because we scope the whole job before we quote it. That matters here. A general contractor who works mostly in flatland San Jose will miss the Chapter 7A ignition-resistant requirements, the one-lane road access constraints, and the septic and well setbacks that define construction on these mountain lots. We don’t miss them. Our reputation across the 95031 zip code is built on writing scopes that hold up through Santa Clara County review, not just until the first surprise.
Noel Figueroa leads every Lexington Hills project personally. Homeowners tell us they chose Workshop because we walked the property, measured access points for concrete trucks and material staging, and explained which brand choices made sense for a fire-severity zone before they signed anything. That’s the difference between a contractor who quotes a job and one who actually builds it here.
Styles & brands we work with
Remodeling Contractor in Lexington Hills
Working as a remodeling contractor in Lexington Hills means dealing with houses that were never built to modern code. Most of the housing stock here is from the 1950s through the 1980s: redwood-sided cabins, post-and-beam frames, hillside homes on pier-and-post foundations. Many of them have original owner-builder work that needs correction before a remodel can start. A kitchen remodel in Lexington Hills typically runs $14,000 to $45,000 depending on whether we’re opening load-bearing walls, upgrading electrical panels, or replacing fire-vulnerable framing. We factor the engineering into the quote, not after demolition.
Septic, Well, and Setback Considerations
On acreage lots, a kitchen or bath remodel often touches plumbing that ties into a septic system. Santa Clara County requires separation between any new structure and the septic tank, leach field, and well. We check those setbacks before we draw plans, because relocating a leach field mid-project can add five figures and weeks to the schedule.
Opening Up a 1950s Mountain Home
Many Lexington Hills remodels involve removing a wall between a dated kitchen and a living room. In post-and-beam construction, that wall may or may not be load-bearing in a conventional sense. We bring in a structural engineer who knows houses built on piers and slopes, so the beam we install actually works. A kitchen island installation in Lexington Hills runs $3,000 to $10,000, and countertops from Caesarstone or Silestone run $2,000 to $6,500.
Licensed General Contractor in Lexington Hills
Hiring a licensed general contractor in Lexington Hills isn’t just about having a license number. It’s about knowing which inspections apply, which county departments review your plans, and what Cal Fire will look for when they walk the site. Workshop Contractors is a state-licensed general building contractor, insured and bonded, and we pull permits for every job. A room addition in Lexington Hills runs $45,000 to $130,000, and an ADU construction project runs $90,000 to $220,000. Those numbers reflect local engineering, WUI-compliant materials, and the cost of getting crews and equipment up mountain roads.
County Permits and Cal Fire Review
Lexington Hills is unincorporated, which means Santa Clara County handles permitting, not the City of Los Gatos. That adds plan check time and review layers. If your project touches the exterior envelope – decking, siding, roofing, vents – Cal Fire’s Wildland-Urban Interface standards under Chapter 7A apply. We prepare those specs up front so the permit package doesn’t bounce back.
Hillside Foundations and Grading
Steep redwood-and-chaparral lots rarely work with off-the-shelf foundation plans. Pier-and-post foundations, retaining walls, and engineered drainage plans are common on Lexington Hills builds. We work with geotechnical and structural engineers who know Santa Cruz Mountains soils, and we front-load excavation and erosion control before the rainy season hits.
Trusted Brands We Service in Lexington Hills
We source and install brand-name materials that hold up to this climate. Cambria and Caesarstone countertops resist heat and wear in kitchens that get heavy use. Kohler and Moen fixtures give you solid warranties and parts you can actually find. Blanco sinks stand up to well water with higher mineral content, which is common across Lexington Hills households. Because we have direct relationships with these manufacturers, we can get replacement parts and warranty service to the 95031 area faster than a contractor who orders through a big-box store.
See the difference
Before
After
Before
After
Before
AfterCommon General Contractor Problems We See in Lexington Hills Homes
- Chapter 7A conflicts mid-build. A homeowner starts with a flatland spec package, gets through framing, and then the county inspector flags the decking, siding, or vents as non-compliant with wildland-urban interface code. Reordering materials and redoing work adds weeks and thousands of dollars. We spec ignition-resistant assemblies from day one.
- Concrete truck access failures. One-lane mountain roads and tight switchbacks don’t accommodate a standard mixer truck. We plan for pumped concrete, smaller loads, or alternate foundation systems before the first quote, not when the truck can’t turn around.
- Winter erosion surprises. Lexington Hills gets heavy winter rain on steep slopes. Sites without engineered grading and sediment control send soil off the property, triggering county erosion-control redos and fines. We build drainage into the original scope.
- Red-flag schedule losses. During fire season, red-flag warnings can suspend hot work, grading, and some inspections. That means roofing and deck replacements scheduled for late summer can slip weeks. We front-load those trades in spring or early fall and build the schedule around the fire calendar.
Pricing for General Contractor in Lexington Hills, CA
Lexington Hills pricing is higher than flatland San Jose because the site conditions and code requirements are different. Here are the ranges we see most often for the projects homeowners call us about.
| Project | Typical Range in Lexington Hills |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
| Roof Replacement | $8,000 – $20,000 |
| Metal Roof Installation | $15,000 – $40,000 |
What moves the price: slope and access for concrete and equipment, whether your septic and well setbacks require layout changes, how much grading and drainage engineering the lot needs, and whether we’re replacing fire-vulnerable exterior components with ignition-resistant assemblies. We walk the property and write a line-item quote. Call (844) 384-3361 to schedule your free estimate.
We Also Serve Cities Near Lexington Hills
Workshop Contractors serves homeowners across the Santa Cruz Mountains and the South Bay. We regularly work in Los Gatos, Monte Sereno, Cambrian Park, and Scotts Valley. If you’re just outside Lexington Hills but planning a major remodel or addition, call (844) 384-3361 and we’ll let you know if your property is in our service area.
Serving Lexington Hills, CA — Our Local Coverage Area
We’re based in the Lexington Hills area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About General Contractor in Lexington Hills
Yes. Lexington Hills sits inside a Cal Fire wildland-urban interface severity zone, so additions and rebuilds must use Chapter 7A ignition-resistant assemblies for decking, siding, roofing, and vents. A standard San Jose spec package won’t pass Santa Clara County plan check or inspection here. We write the WUI compliance into the scope from the first quote. Call (844) 384-3361 and we’ll explain exactly which materials your project needs.
Lexington Hills is unincorporated, so Santa Clara County handles the reviews, and county plan check runs slower than a city like Los Gatos or Monte Sereno. Add Cal Fire WUI review on top of that, and the timeline stretches. We manage the submittal process, respond to plan check comments, and keep the project moving. Call (844) 384-3361 for a realistic schedule on your project.
Yes, and we do it regularly. On a steep redwood-and-chaparral lot off the Lexington Hills ridge, we scoped a detached ADU and shop where the whole project turned on one-lane road access. Concrete trucks couldn’t stage, so we front-loaded a pier-and-post foundation with pumped concrete and set the grading and drainage plan for winter storm erosion control before pulling Santa Clara County permits. Our tech walked the owner through the Chapter 7A deck and vent spec, the well-and-septic setbacks, and the load-bearing rough-in timeline in one written scope, then held the roof and deck work off the late-summer red-flag calendar. That’s how we build on mountain lots. Call (844) 384-3361 for a free assessment of your property.
They affect it directly. Many Lexington Hills roads can’t take a standard concrete mixer, so we use pumped concrete or smaller trucks, which costs more per yard. Material staging also gets harder; we sometimes have to shuttle lumber and roofing materials up in smaller loads. We measure access on the first site visit and price it accurately. Call (844) 384-3361 and we’ll walk your road before we quote.
Schedule them for spring or early fall. Red-flag warnings during fire season can suspend hot work and some inspections, which stalls roofing and deck projects for days or weeks at a time. We front-load roof and deck work in the May through early July window, then again after the first rains. Call (844) 384-3361 to reserve a spot on the calendar before it fills.
Written by Noel Figueroa, Owner at Workshop Contractors, serving Lexington Hills and the surrounding Santa Cruz Mountains communities.