Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Remodeling Company in Lexington Hills, CA
Home renovation in Lexington Hills means working with steep redwood-and-chaparral hillside lots, 1950s-to-1980s owner-built mountain homes, and Cal Fire’s Wildland-Urban Interface code layered on top of Santa Clara County permits. Most of the houses here sit on pier-and-post foundations with redwood decks and aging shake or composite roofs, so nearly every remodel touches structural correction, fire-hardening, or drainage work that flatland contractors never see. Workshop Contractors has served Lexington Hills since 2011, and we handle the full scope, from foundation to roof, as one team. Call (844) 384-3361 for a free estimate.
Why Lexington Hills Homes Are Different
Lexington Hills is unincorporated Santa Cruz Mountains territory, which means construction here runs through Santa Clara County permitting and Cal Fire’s Wildland-Urban Interface (WUI) building standards. Any addition, deck replacement, or rebuild has to meet Chapter 7A ignition-resistant material requirements. Siding, soffits, vents, and deck boards all need to resist ember intrusion, and the material choices ripple through the entire budget. Contractors who only work the valley floor rarely know those code sections by heart. We do, because we’ve been pulling permits up here for over a decade.
The housing stock compounds the challenge. These are largely custom and owner-built homes from the 1950s through the 1980s: redwood-sided cabins, post-and-beam structures, and hillside houses on pier-and-post foundations. Many have no original engineered foundation, and decades of owner-builder modifications mean remodels routinely involve seismic upgrades, correcting improper framing, and replacing wood shake roofs or wood decks with ignition-resistant assemblies. The steep lots also mean grading, retaining walls, and pier design drive the engineering before a single wall gets opened. Add in seasonal red-flag warnings that can suspend hot work, grading, and some inspections, and you have a project calendar that rewards contractors who front-load work and plan haul routes around one-lane mountain roads. Lexington Hills projects succeed or fail on sequencing, and that’s where our single-contract approach pays off.
Styles & brands we work with
Our Main Lexington Hills Services
Most Lexington Hills homeowners reach out to us for one of two reasons: they want a general contractor who can manage an entire hillside project without subcontractor chaos, or they want a full home remodel that respects the fire code and terrain constraints. Here’s what each involves.
General Contractor in Lexington Hills
We act as the single point of accountability for whole-property work in Lexington Hills. That means one contract, one schedule, and one team responsible for how the roof, siding, windows, decks, and hardscape interact. On hillside lots, that integration matters more than anywhere else: a deck replacement affects drainage, drainage affects the retaining wall, and the retaining wall affects the foundation. We source and install across all of it, coordinating Cal Fire-compliant materials, county inspections, and the trades so you’re not managing five different crews yourself. For a deeper look at how we run projects up here, see General Contractor in Lexington Hills.
Home Remodeling in Lexington Hills
Remodels in Lexington Hills are rarely cosmetic. The homes are older mountain builds, so a kitchen or bath project often starts with correcting framing, upgrading electrical, or replacing fire-vulnerable sheathing before finishes go in. We handle that full sequence under one contract, and we guide the material conversation from experience: James Hardie siding for ember resistance, Cambria or Silestone counters for durability, Kohler or Grohe fixtures for the wet spaces. If you’re planning a whole-home or major room remodel up here, read the full scope on Home Remodeling in Lexington Hills.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Home Renovation in Lexington Hills
Home renovation in Lexington Hills means working with the realities of 1950s-to-1980s owner-built mountain homes: pier-and-post foundations, wood shake roofs, redwood decks, and decades of improvised modifications that don’t meet current WUI or seismic standards. Dry summers and Diablo-wind fire weather push every exterior decision toward ignition-resistant materials, while winter rains on steep slopes demand erosion control and careful sequencing so a project doesn’t wash downhill mid-build. Most homeowners don’t realize how many systems interact here; a roof replacement changes gutter flow, which changes hillside drainage, which changes the soil under the foundation. We manage those intersections from the start. As a full-scope Home Renovation contractor, we run the project as one integrated engagement, not a parade of subs.
Home Renovation Contractors
Signs you need it
You have multiple systems failing at once: a leaking roof, a deck that’s soft underfoot, single-pane windows, or a foundation showing cracks after wet winters.
What it costs in Lexington Hills
A broad home renovation in Lexington Hills typically falls between $45,000 and $130,000 depending on how many systems the project touches and how much structural correction the house needs.
How we do it
We start with a site walk and permit review, then sequence the work so grading, foundation repair, and fire-hardening happen before any finishes, keeping the project moving through red-flag and rain closures.
Home Renovators
Signs you need it
Your home has accumulated piecemeal repairs that never quite solved the underlying problem, leaving you with recurring leaks, drafts, or water intrusion every winter.
What it costs in Lexington Hills
Typical renovation projects in Lexington Hills run from $45,000 for partial-system work up to $130,000 for whole-home corrections, with kitchens alone landing between $14,000 and $45,000.
How we do it
We correct the root cause first, whether that’s re-flashing a roof, re-grading a slope, or stiffening a pier-and-post foundation, then rebuild outward so the finishes actually last.
What Home Renovation Costs in Lexington Hills
| Item | Typical range in Lexington Hills |
|---|---|
| Whole-home renovation | $45,000 – $130,000 |
| Kitchen remodel | $14,000 – $45,000 |
| Bathroom remodel | $9,000 – $28,000 |
How does the WUI code change what a Lexington Hills renovation costs?
Chapter 7A requires ignition-resistant siding, vents, decking, and roof assemblies, which typically adds material cost versus standard construction, and certain hot-work and grading steps get suspended during red-flag warnings, stretching schedules. Call (844) 384-3361 for a site-specific quote; our estimates are free and factor in the full code path.
Can you renovate a Lexington Hills hillside home without a full foundation replacement?
Often yes. Many pier-and-post foundations can be reinforced and braced rather than replaced, but the answer depends on soil, slope, and what previous owners built. We assess that before any finishes are priced, so you know the structural scope first. Call (844) 384-3361 to schedule a walkthrough.
Brands We Service in Lexington Hills
We service and install a wide range of manufacturer lines up here, with hardscape pavers from Belgard, Unilock, and Techo-Bloc being common on Lexington Hills hillside patios and retaining-walled driveways. Parts and material selections are handled through our supplier network, and we plan staging around the one-lane mountain roads so the right materials arrive before crews do. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Remodeling Company in Lexington Hills, CA
| Service | Typical range in Lexington Hills |
|---|---|
| Kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Bathroom remodel | $9,000 – $28,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Paver driveway installation | $7,000 – $18,000 |
| Roof replacement | $8,000 – $20,000 |
| Window replacement | $4,500 – $15,000 |
| Home addition | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
| Garage conversion | $30,000 – $80,000 |
Prices in Lexington Hills run higher than valley jobs because of the WUI material requirements, hillside engineering, and the logistics of moving materials and concrete trucks up narrow mountain roads. We give you a written, line-item quote before work starts, and we don’t change the number on you once we’ve agreed to it.
Neighborhoods We Serve in Lexington Hills
We work throughout the 95031 zip code, from the Aldercroft Heights side down through the ridge roads and along the canyon corridors that connect to Summit and Old Santa Cruz Highway. Our crews know the one-lane access points, the tight turnarounds, and where a concrete truck can and cannot go. Typical response for an estimate in Lexington Hills is within a few days of your call.
- Aldercroft Heights
- Summit Road corridor
- Old Santa Cruz Highway frontage
- Highland Way
- Bear Creek Road area
Service Area – Cities Near Lexington Hills
Our service area extends from Lexington Hills into the surrounding Santa Cruz Mountains and South Bay communities. If you’re in Los Gatos, CA, Monte Sereno, CA, Cambrian Park, CA, or over the hill in Scotts Valley, CA, we bring the same single-contract, brand-sourced approach to your project. Give us a call at (844) 384-3361 to find out how quickly we can get to your street.
Serving Lexington Hills, CA — Our Local Coverage Area
We’re based in the Lexington Hills area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Remodeling Company in Lexington Hills
Yes. We pull all required Santa Clara County and Cal Fire WUI permits ourselves and schedule the inspections. Because Lexington Hills is unincorporated, the county is the authority, and the fire marshal’s sign-off is part of the process on most exterior and structural work. We manage that chain so you don’t have to chase inspectors.
Red-flag warnings can suspend hot work such as roofing, grinding, and some grading operations, and can also delay county inspections. We plan projects around fire season by front-loading structural and interior work in late summer and holding roofing and deck replacements for periods when burn restrictions are less likely to interrupt the schedule.
Yes, and those are the projects we know best. The slope drives everything: retaining wall engineering, pier depth, drainage, and material staging. We evaluate access and geotech realities before quoting, so the plan you approve is the plan that actually gets built, not a flatland estimate that falls apart on day one.
What happens when you call
- 1A real person answersNo phone trees — talk to a local construction pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lexington Hills Customers Say
"He caught an error in the engineer's drawings before it got framed, which would have been an expensive thing to discover later."
— Maria Martinez"Quiet, polite, worked straight through, was gone in under two hours. My kids were napping and he was careful about it without me even mentioning it."
— Jerome Dawson"The foundation survey came back dead on. Everything downstream of that being square is the reason the rest of the build went smoothly."
— Michelle Sullivan