Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in Lexington Hills, CA | Workshop Contractors
We service, repair, and replace PGT windows and doors throughout Lexington Hills, and the one thing that separates our PGT work here from anywhere else is that we plan every job around Cal Fire’s Wildland-Urban Interface rules. If your PGT sash corners have cracked, your glazing gaskets leak during winter rain, or your slider tracks bind with redwood duff, we handle the full correction, including the Chapter 7A ignition-resistant detailing most flatland contractors never think about. Call (844) 384-3361 for a free estimate on any PGT repair, replacement, or new installation.
Why Lexington Hills Residents Choose Us for PGT Service
We’ve installed and repaired PGT windows and doors up and down the Santa Cruz Mountains — including Los Gatos PGT service — long enough to know how these units actually behave in wildfire country and on steep hillside lots, not just how they look in a catalog. We’re an independent contractor, not an authorized PGT dealer, which means our recommendations come from field experience rather than a dealer agreement. When we tell a Lexington Hills homeowner that a PGT WinGuard slider is worth repairing versus replacing, it’s because we’ve pulled that same unit apart and seen what holds up and what doesn’t. Our OEM-compatible parts approach means we source factory PGT sash, gaskets, rollers, and hardware whenever they’re still available. Noel Figueroa, our owner and general contractor, spent his early years learning framing and finish work from tradesmen who built half the houses on his street. He brings that same “does it actually hold up” standard to every PGT opening we touch.
Styles & brands we work with
Common PGT Construction Problems We Solve in Lexington Hills
- Cracked vinyl sash corners on single-hung and slider units. We see this constantly on unshaded south and west elevations in Lexington Hills. The dry Diablo-wind heat followed by cold mountain nights puts relentless thermal cycling on PGT vinyl corners until they pull apart. A cracked sash corner won’t just look bad; it breaks the unit’s structural seal and invites ember intrusion. We replace the sash with OEM where profiles allow.
- Leaking glazing gaskets and seals. Older PGT units dry out in our rainless summers, then shrink further, and when the first big winter storm hits, water tracks into the rough opening and behind redwood siding. Homeowners usually notice the stain inside before they notice the gasket. We pull the sash, replace the gasket, and check the rough opening for rot or ember gaps while we’re in there.
- Aluminum slider tracks that bind and corrode. Lexington Hills sits under a heavy redwood and chaparral canopy. Pollen, duff, and grit shed constantly onto hillside windows, building up in PGT slider channels until the rollers bind. On flatland lots, debris takes longer to accumulate. Here, it’s a seasonal problem. We clean, reshim, and replace worn rollers, and we’ll tell you honestly if the track itself is too far gone.
- Air and ember intrusion at the perimeter. Original builder-grade PGT frames set into post-and-beam or pier-and-post walls with minimal flashing are a real liability in a WUI zone. The opening detail matters as much as the glass in Lexington Hills. We reflash and harden the perimeter when we replace these units, rather than just swapping glass and calling it done.
- Out-of-square rough openings on owner-built homes. Much of Lexington Hills’ housing stock is 1950s to 1980s owner-built mountain homes. Rough openings often don’t square up, which tilts the PGT frame, throws off the sash alignment, and causes the corner stress that leads to cracks. Reframing the opening is sometimes the only honest fix.
PGT Service in Lexington Hills: What Local Conditions Mean for Your Equipment
Lexington Hills sits in an unincorporated Santa Cruz Mountains wildland-urban interface zone under Santa Clara County permitting and Cal Fire defensible-space rules. Here’s what that means for a PGT window or door replacement: if your project changes an opening, even slightly, it can pull in Chapter 7A ignition-resistant and ember-resistant detailing requirements. A same-size swap in flatland San Jose never triggers that review. But in Lexington Hills, the county wants to know that the new PGT frame, the flashing, the sealants, and the surrounding assembly all resist ember intrusion. We’ve built that detail into every PGT install we do in 95031. The steep hillside lots add another layer. Grading, pier-and-post foundations, and narrow one-lane roads off Summit Road and Aldercroft Heights mean material staging and access dictate the plan before we ever pull a permit. Build it right the first time. The second time costs twice as much and nobody’s happy about it.
PGT Models & Products We Service in Lexington Hills
We work on the PGT WinGuard impact-resistant window and door line, including WinGuard Aluminum sliding glass doors and single-hung units. We also service the PGT EnergyVue vinyl line, which shows up on a lot of 1980s and 1990s Lexington Hills cabins, especially on view walls. Sliding glass doors, both WinGuard and EnergyVue, are common here because of the hillside views. Our parts approach is straightforward: we use PGT OEM replacement sash, gaskets, rollers, and hardware where the factory still supplies them, and only turn to quality aftermarket parts for discontinued profiles where OEM stock is gone. We keep common PGT roller assemblies and gaskets on hand so most Lexington Hills service calls don’t wait on a parts order. Visit our PGT sales & service page for the full scope of what we cover.
See the difference
Before
After
Before
After
Before
AfterPGT Service Pricing in Lexington Hills
Here are the ranges we typically see for PGT-related work in the Lexington Hills market. The final number depends on WUI detailing, hillside access, rough-opening condition, and how many units are involved.
| Service | Typical Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
Roof repair matters here more than most people expect, because a leaking roof above a PGT window assembly can funnel water straight into the rough opening and mimic a window leak. We check both. Every free estimate includes a look at the existing flashings, the surrounding siding or stucco, and the conditions that will affect the install. Call (844) 384-3361 for a written line-item quote.
Serving Lexington Hills, CA — Our Local Coverage Area
We’re based in the Lexington Hills area and know this community well, and we also provide PGT service in Monte Sereno. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – PGT Construction in Lexington Hills
Yes, in most cases where the opening changes or the project triggers Santa Clara County’s WUI review. Chapter 7A is the California Building Code section for building materials in wildfire zones, and Lexington Hills is squarely inside one. We handle the ignition-resistant flashing, ember screening, and sealant details as part of the job. Call (844) 384-3361 and we’ll tell you specifically what your address will trigger.
It’s the thermal cycling. Dry Diablo-wind heat followed by cold mountain nights stresses the vinyl corner welds on PGT single-hung and slider units, particularly on unshaded south and west elevations. Homes with out-of-square rough openings, common in 1950s to 1980s owner-built Lexington Hills houses, make the problem worse because the frame sits under constant twist. A cracked sash corner breaks the unit’s seal and leaves an ember path, so it’s worth addressing before fire season.
Yes. We stage materials up the grade by hand or with a small tracked carrier where a delivery truck can’t reach. That’s standard for the one-lane access roads in Lexington Hills, and we plan for it in the estimate rather than discovering it on install day. A job that requires hand staging costs a little more, but the number you get from us includes it.
Most replacements in Santa Clara County need a permit, especially in the WUI zone where Chapter 7A review applies to opening changes, and we handle PGT repair in Cambrian Park under the same rules. We pull permits, meet the inspectors on site, and handle the paperwork as part of our scope. One contract, one schedule, one responsible party for the whole PGT replacement.
A cracked sash, a failed gasket, or a worn roller is usually worth repairing. A frame that has lost its seal or sits in an unflashed, out-of-square opening usually warrants full-frame replacement rather than chasing a leak. In Lexington Hills, the answer also depends on whether the existing perimeter would meet Chapter 7A if the unit came out. We’ll give you an honest read either way, and the estimate is free.
Service Areas Near Lexington Hills
Beyond Lexington Hills, our crew covers the surrounding Santa Clara County and mountain communities. We regularly work in Lexington Hills service area neighborhoods from the valley floor up to the ridge, plus nearby PGT service in Communications Hill and PGT service in Lompico. If you’re not sure whether your address falls in our range, call and ask.
Book Your PGT Service in Lexington Hills Today
If your PGT windows or doors are showing their age, or if you want them hardened before the next red-flag warning, call (844) 384-3361 — we also offer PGT repair in Scotts Valley. We’ll schedule a free estimate at your Lexington Hills home and give you a straight answer on repair versus replacement.
Written by Noel Figueroa, Owner at Workshop Contractors, serving Lexington Hills and the Santa Cruz Mountains.